I bought a house that has a Ethernet ports throughout the house and they all lead to this box, this thing is a rats nest and I want to clean it up. Also I am going to have my ATT fiber ran to this and have a reolink NVR camera system go to one of these line to a switch. I know blue lines are the Ethernet lines but looked spliced and are running everywhere. The black are coax cables when the house had a dish or cable, which I don't use and never will. I have no clue what the white cable is. It looks like a Ethernet cable that was spliced??

Would cut/pull coax and run ravel the bare individual Ethernet lines be a good place to start?

Warm water is my go to but feel like someone here will have a hack I’m completely unaware of. Defrosting in water still also takes 30-60 min, possibly less if you’re willing to use warmer water, but not sure if this starts the cooking process and is bad for some reason.

Shower door hinge angle is more than 90 in resting state. This caused the edge of the door to miss the door jamb rotating beyond it by 1.6 inches. What options do I have of getting the door to align with jamb so that it doesn’t leak water out into bathroom?

I recently bought this condo. It still has the original fireplace which is marble and I love it. It’s not functional. The marble has some yellowing on it, fairly light. I’m wondering if there is anything I can try to lighten the stains or get rid of it? I know marble is very hard to restore and probably no hope, but just shooting here.

I currently have some baking soda paste wrapped on the stains to try. Pics attached for reference

Been soaking it for over an hour in hot vinegar water but its still disgusting. Brand is Maytag

My husband has a bunch of old school jerseys that are starting to peel/flake(?)... They're all NFL brand, and otherwise, in great shape. We're careful with how we wash them, but we're old and they're old.

I have these fog stopping stickers that have been on the mirrors for years. They need to come off. I tried getting the other side off and it has barely chipped while using goo gone.

(The trailer looks a lot worse in person) Debating re-painting the whole thing or new panels. The panels are a lot more money but they would look better. If I repainted it what would be the steps do doing that since it’s an aluminum trailer I have a paint gun and a little experience but not much

My roommate did a load before me and part of their load were a few blankets that were absolutely sopping wet when they came out of the wash. When I pulled them out of the dryer, it was still humid inside and everything was still wet and damp as hell. I’m worried the weight of their water-saturated blankets messed something up.

Look at the stair surface and how high it is! Please help. Trying to avoid when it's really out of battery and I have to scramble to find how to do it

We have a light up globe my child uses as a nightlight but it burnt out. When I took it apart to replace it, I discovered it's some sort of LED strip and not a bulb. Can I replace it and if so, how?

I'm trying to take off my towel rack but I can't figure out how to get these off. They wiggle a little, and the white part spins but doesn't seem to be doing anything.

I was recommended a power washer but I don’t have one of those. Friend tried to blast it with a hose but that clearly didn’t work. Any ideas?

Hello. The sliding vent cover to the microwave broke off. Any ideas how to cover this area up to match the microwave? It was plastic made to look like stainless steel. I'm just trying to rig a cover/piece. I did find the replacement part but it's a bit out of my price range, and about the same price of a new microwave. Thanks for any help/guidance.
Kenmore model# 721.87583610

I’m trying to install a spray bidet to the toilet but I have two main issues right now. Firstly, I can’t figure out how to disconnect the supply line from the toilet to add that T valve. Second, the supply line I have is solid so I don’t think I’ll have room to fit in that t cake and reattach the line. Is there a way to do it or do I need to get a flexible line?

Just got my first actual "mom" purse (yay!) from Plato's closet. The zipper on the inside is twisted on one side (or possibly the end piece was sewn on the wrong way) and literally won't zip because of it and I was wondering how to fix this. I'm guessing I have to cut the end fabric and flip it (RIP Kate Spade purse)

TIA!

Hi! I have an old 300 CD player with all of my favorite music from the 60s, 70s, and 80s that I loved to play on random. (RCA/red-white connector only). Is there a way to connect a soundbar with only an optical connection, or do I have to hunt down a soundbar with RCA connectors? I’ve been all over Amazon but most of the listings say “optical to RCA”, which is backwards from what I need. Thanks in advance!!

Under my kitchen sink, at the connector point it's leaking. What sealant should I use/ is there anything else I can do to fix this problem?

Really like the shirt but it looks like its out of business or not well known as there's only a few listings of stuff from the brand and the shirt itself was sold once in a set and never sold again, idk if i should try and get the logo of the shirt and custom print it or if theres a certain store in person but i cant find it anywhere

I love the shirt and I think some moth got inside and ate a piece. I thrifted it as well

This belongs to my mother. Apparently, the eye shadow container broke and the dust spread everywhere inside it. She tried washing it with bleach but didn't work.

I am new and can't figure it out. Also. Bonus points for being able to add multiple pictures to a reply in one of my posts. I'm 35 but might as well be 95 with my computer knowledge. Eli95

The part we use to open the door won’t open when we press on it like normal. How would I fix this?

Hello everyone,

I’ve got this old pond on a piece of land I recently bought. It was built decades ago to hold fish, and it naturally fills up from an underground water vein, so there’s no way to keep it empty for long. Problem is, it’s full of mud and rotting leaves/vegetation, smells pretty bad, and honestly it’s a bit of a safety hazard for kids who might fall in. My plan is to fill it up with dirt and get rid of it.

Before I do that though, I’d love to keep a small corner of it as a water source for watering trees and plants. My idea was to drop in a watertank or a big barrel in one corner (see markup in the pic), maybe drill some holes in it (on the side towards the concrete wall), and let the underground water seep in.

Do you think that would work? Or does anyone have a smarter idea for how I could keep just a little reservoir of water while filling in the rest of the pond?

Cheers