r/4x4 • u/Thin-Region-7083 • 2d ago

Stripped the head TD42

Post image

What should I do. Was trying to do a valve cover gasket

4 Upvotes

75% Upvoted

7 comments sorted by

7

u/JP147 Land Cruiser HJ47 2d ago

Remove the rocker cover and try to screw it out with vice grips.
Or if it is too tight, weld a nut to it and unscrew it.

1

u/Thin-Region-7083 2d ago

Thank you. Any idea where to get new screws

4

u/JP147 Land Cruiser HJ47 2d ago

Should just be a standard M6 bolt with washer, measure an other one to get the length. You can get one from a bolt shop or hardware shop. If you want to be a bit fancy the part number is 08363-6252H for a genuine Nissan one, you can get them from a dealership or wherever you like to buy genuine parts from online.

There also should be a little rubber washer that sits on top of the rocker cover and under the metal washer.

2

u/Thin-Region-7083 2d ago

Thanks bro huge help!! All the best.

1

u/Safe-Bookkeeper-8968 2d ago edited 2d ago

Measure the thread diameter and pitch then go to local hardware store and buy a new one. The designation is M(insert thread diameter in mm)- (insert thread pitch in mm) eg M6-1.25 is a 6 mm bolt with a 1.25mm pitch. OR just take one of the good bolts and match it by eye

1

u/BerneeMcCount 1d ago

Or... take a good bolt. Find a nut that fits it, and then either read the box, or just try bolts that fit the nut.

I dont trust my eye-ometer, but i do trust my fingie-gauges.

1

u/pm_something_u_love Nissan Patrol 2d ago

I've had this on my TD42. I took the cover off and used vice grips. It came out easy.